www.truck-diagnost.com

How can i make this fault

Terminal 15 / Supply line short-circuit UBatt

Code 13.5

Terminal 15 / Supply line short-circuit UBatt

--------------------------------------------------------------------------------

- Check the "terminal 15" power supply line (steady positive voltage?)

- Check the ignition switch (defective?)

- Is the ignition switch information correct for the PLD system ?

- Replace the EBS control unit

enko писал(а):- Is the ignition switch information correct for the PLD system ?

Was it checked?

enko писал(а):- Check the "terminal 15" power supply line (steady positive voltage?)

Is it correctly switchable?

Ignition switch off.
Check terminal 15 EBS control unit short Ubat.

den_2001 писал(а):Ignition switch off

Also the BS/EPB ECU shouldn't receive an messages via CAN from PLD ECU like a "ignition is on" when it is really off-stage.

Не умничай

Буду