wabco ebs epb Terminal 15 / Supply line short-circuit UBatt

[enko]

How can i make this fault

Terminal 15 / Supply line short-circuit UBatt

Code 13.5

Terminal 15 / Supply line short-circuit UBatt

--------------------------------------------------------------------------------

- Check the "terminal 15" power supply line (steady positive voltage?)

- Check the ignition switch (defective?)

- Is the ignition switch information correct for the PLD system ?

- Replace the EBS control unit

[acckiy]

- Is the ignition switch information correct for the PLD system ?

Was it checked?

- Check the "terminal 15" power supply line (steady positive voltage?)

Is it correctly switchable?

[den_2001]

Ignition switch off.
Check terminal 15 EBS control unit short Ubat.

[acckiy]

Ignition switch off

Also the BS/EPB ECU shouldn't receive an messages via CAN from PLD ECU like a "ignition is on" when it is really off-stage.

[den_2001]

Не умничай

[acckiy]

Буду